Sapa Door EI30 with flue gas density SA/S200

Doors/door sections with smoke gas density S_a/S₂₀₀
Please note the dimensional limitations depending on the design. All doors can be made as inward- or outward-opening and can be used inside or outside.

- Single door: Max door leaf size B=1350 and H (S_a)=2928 mm/ H (S₂₀₀)=2250 mm.

- Pair of doors: Max recommended door leaf size total B=2365 and H (S_a)=2928 mm/ H (S₂₀₀)=2250 mm. Max door leaf width active/passive door leaf: W=1331/1029 mm. Min door leaf width: W=298 mm

Angled fanlights possible for single or double doors.

Thresholds
The doors can be fitted with or without a threshold in several different designs.
Requirements for S₂₀₀ imposes some restrictions on threshold choices.

Sound reduction
If sound reduction is required, there are variants of laminated sound reduction glass among the approved glasses. Up to approx. Rw = 42 dB.

Glass and fillings
Fire-resistant structures must always be constructed with fire-resistant glazing or infills approved by the building system. The fire glazing can be combined with burglar- and sound-resistant glass, and up to 3-glass for low U-values. Max nominal glass thickness 49 mm.

Clamp protection
The doors can be equipped with surface-mounted finger guards on the hinge side and opposite hinge side. It is a mechanical clamping protection of the Athmer Fingerschutz type that is mounted on the rear edge of the door with a strong fabric that is rolled out/in an aluminium profile under constant spring tension.
- Note: integrated anti-slam edge with rubber strips is not approved in fire rated doors.

Burglary protection.
Door 2086 EI30/ EI₂30 with flue gas density S_a can be performed up to RC3.
Door 2086 EI30/ EI₂30 with flue gas density S₂₀₀ can be performed up to RC2.

Other. Please note that the maximum dimensions are conditional on total weight, area, opening frequency, etc. Architectural support for more information.